All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |
.jpg "Renault RE20 1981 Yellow 30ml ZP-1085")
Renault RE20 1981 Yellow 30ml ZP-1085
.jpg "Renault RE20 1981 Yellow 30ml ZP-1085")
TOP
Renault RE20 1981 Yellow Paint
- 1 x 60ml Yellow
This has been pre-thinned ready for Airbrushing.
Application guide: apply in light coats over a white ground coat
For further information on using Zero Colour Matched Paints please read the Zero Paints F.A.Q. here
: ZP-1302
: ZEROPAINTS
: Farben ZEROPAINTS
: Eine Glasflasche mit Mischkugel, Inhalt: 60 ml. Die Farbe ist verdünnt und für Airbrush sofort gebrauchsfertig.
Achtung: Kein Spielzeug! Nicht geeignet für Kinder unter 14 Jahren.
Texte und Bilder unterliegen dem Copyright - www.zero-paints.com / www.slotfabrik.com
For further information on using Zero Colour Matched Paints please read the Zero Paints F.A.Q. here
All Zero Paints dry matt and require clearcoating unless otherwise specifiedApplication Notes :Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. For additional thinning use Basecoat Thinners. Which Airbrush Cleaner should I use ?You can use either use Zero Paints Airbrush Cleaner or Basecoat Thinners, alternatively any thinners that contain Toluene should work, but it's best to test first. DO NOT use White Spirt or Acrylic Thinners, they are not suitable. |
 |
Health and Safety Notes :Harmful by inhalation. Irritating to eyes. Keep away from sources of ignition. NO SMOKING. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable gloves. Use in a well ventilated area. Keep out of reach of children. Please download the Material Safety Datasheets here -> |