Main page » Slotfabrik Chassis » SF Chassis 7FIVE 18D

SF Chassis 7FIVE 18D

SF Chassis 7FIVE 18D

Product No.:: FFSFB1003_18
Shipping time:: ca. 3-4 days (abroad may vary)
Stock:: pieces
Weight:: 0.093 kg per piece

120,00 EUR

incl. 19% tax excl. Shipping costs

Description

Description

For 18D Motors!

Shimpment: chassis pre-assembled with bodyholders
(without axle, bearing, guide, guide nut, motor, cable, rims, tires)

Motor bracket for 18D-motors
Wheelbase: 107mm - 121mm
Width of chassisplate: 70mm
Width axle mounting front: 57mm
Width axle mounting rear: 48mm
Track width front min: 79,2mm (rim 21x3mm,width of rim total 10mm) e.g.: Scaleauto SC2709P
Track width rear min: 79,2mm (rim 21x13mm, with of rim total 15mm) e.g.: Scaleauto SC2421P
Weight of chassis: ca. 93gr (without axle, bearing, guide, etc....)
Weight of Chassis total: ca. 159gr (with axle, bearing, guide, cable, motor 13D, etc.....)

Hersteller Informationen

Slotfabrik

Produktsicherheit / GPSR:

Hersteller: Afolabi Osu Slotfabrik
Anschrift: Humboldtstr 4/1
Kontakt: service@slotfabrik.com
Sicherheitshinweis:
ACHTUNG! Für Kinder unter 36 Monaten nicht geeignet. Erstickungsgefahr wegen verschluckbarer Kleinteile.
Achtung: Kein Spielzeug - Nicht geeignet für Kinder unter 14 Jahre

http://www.slotfabrik.com/

This product is similar to:

Bearing 3x6x2,5mm for 3mm axle

for 3mm axle
1 piece scope of delivery

3,50 EUR

Felgenset Viper / Ferrari 21x13mm & 21x6mm...

Set of rims (2 pieces rear and 2 pieces front)
rear - 21x13 x 15mm ca.3,0g
front - 21x 6 x 10mm ca.1,5g

45,90 EUR

Carrera Hybrid Wheels M 002

Tuning wheels for Carrera Hybrid vehicles in 1/50 scale.

Rims in size M are visually slightly larger than the original wheels, while the wheel diameter remains unchanged.

The rims have the same dimensions for tire fitting as the original rims, so the original tires can be used.

Available in various colors.

High-quality painted and sealed with 2K clear coat.

Delivery without tires!

After payment is received, the rims are painted in the selected color. Due to drying times, delivery takes 3-4 business days.

Printed with ABS-like PRO2 resin.

These parts are produced using a 3D printing process (ABS-like PRO2 resin), painted by hand, and assembled. Therefore, minimal variations between parts may occur.

Please note during installation that these are resin 3D-printed parts, which are more fragile than conventional mass-produced items.

Handle with care when assembling!

Caution: Not suitable for children under three years of age due to small parts that may pose a choking hazard.

Keywords: wheels, Porsche, Carrera, hybrid.

from 11,49 EUR

ScaleAuto Wheels Pro Comp4 diam.26,5x13mm...

for Ø3mm axle, foam rubber with Ø21mm alu-rim and srew
Scope of delivery: 2 pieces

15,99 EUR